© 2017-2019 The original authors.

Copies of this document may be made for your own use and for distribution to others, provided that you do not charge any fee for such copies and further provided that each copy contains this Copyright Notice, whether distributed in print or electronically.

Preface

License

Specification: R2DBC - Reactive Relational Database Connectivity

Version: 0.8.0.RC1

Status: Draft

Specification Lead: Pivotal Software, Inc.

Release: 2019-09-26

Copyright 2017-2019 the original author or authors.

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

     https://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.

Foreword

R2DBC brings a reactive programming API to relational data stores. The Introduction contains more details about its origins and explains its goals.

This document describes the first and initial generation of R2DBC.

Organization of this document

This document is organized into the following parts:

1. Introduction

R2DBC stands for Reactive Relational Database Connectivity. R2DBC started as an experiment and proof of concept to enable integration of relational databases into systems that use reactive programming models –- Reactive in the sense of an event-driven, non-blocking, and functional programming model that does not make assumptions over concurrency or asynchronicity. Instead, it assumes that scheduling and parallelization happen as part of runtime scheduling.

1.1. The R2DBC SPI

The R2DBC SPI provides reactive programmatic access to relational databases from Java and other JVM-based programming languages.

R2DBC specifies a service-provider interface (SPI) that is intended to be implemented by driver vendors and used by client libraries. By using the R2DBC SPI, applications written in a JVM programming language can run SQL statements and retrieve results by using an underlying data source. You can also use the R2DBC SPI to interact with multiple data sources in a distributed, heterogeneous environment. R2DBC targets primarily, but is not limited to, relational databases. It aims for a range of data sources whose query and statement interface is based on SQL (or an SQL-like dialect) and that represent their data in a tabular form.

A key difference between R2DBC and imperative data access SPIs is the deferred nature of execution. R2DBC is, therefore, based on Reactive Streams and uses the concepts of Publisher and Subscriber to allow non-blocking backpressure-aware data access.

1.2. Target Audience

This specification is targeted primarily towards:

  • Vendors of drivers that implement the R2DBC SPI.

  • Vendors of client implementations who wish to implement a client on top of the R2DBC SPI.

  • Vendors of runtime libraries who wish to embed R2DBC into their eco-system to provide R2DBC runtime services.

This specification is also intended to offer:

  • An introduction for end-users whose applications use the R2DBC SPI.

  • A starting point for developers of other SPIs layered on top of the R2DBC SPI.

1.3. Acknowledgements

The R2DBC specification work is being conducted as an effort of individuals that recognized the demand for a reactive, standardized API for relational database access. We want to thank all contributing members for their countless hours of work and discussion.

Thanks also go to Ollie Drotbohm, without whom this initiative would not even exist.

1.4. Following Development

For information on R2DBC source code repositories, nightly builds, and snapshot artifacts, see the R2DBC homepage. You can help make R2DBC best serve the needs of the community by interacting with developers through the community. To follow developer activity, look for the mailing list information on the R2DBC homepage. If you encounter a bug or want to suggest an improvement, please create a ticket on the R2DBC issue tracker. R2DBC has an open-source organization on GitHub that bundles the various projects (SPI and drivers) under R2DBC.

To stay up to date with the latest news and announcements in the R2DBC eco system, you can subscribe to the mailing list. You can also follow the project team on Twitter (@R2DBC).

2. Goals

This section outlines the goals for R2DBC and the design philosophy for its SPI. It covers the following topics:

2.1. Enabling Reactive Relational Database Connectivity

The R2DBC specification aims for establishing an interface that has a minimal API surface to integrate with relational databases by using a reactive programming model. The most significant goals are honoring and embracing the properties of reactive programming, including the following:

  • Non-blocking I/O

  • Deferred execution

  • Treating application control as a series of events (data, errors, completion, and so on)

  • No longer assuming control of resources but leaving resource scheduling to the runtime or platform (“React to resource availability”)

  • Efficiently using resources

  • Leaving flow control to be handled by the runtime

  • Stream-oriented data consumption

  • Functional programming within operators

  • Removing assumptions over concurrency from the programming model and leaving this aspect up the runtime

  • Using back-pressure to allow flow control, deferring the actual execution and not overwhelming consumers

2.2. Fitting into Reactive JVM platforms

R2DBC aims for seamless integration of reactive JVM platforms, targeting Java as its primary platform. R2DBC should also be usable from other platforms (such as Kotlin or Scala) without scarifying its SPI for the sake of idiomatic use on a different platform.

2.3. Offering Vendor-neutral Access to Standard Features

R2DBC SPI strives to provide access to features that are commonly found across different vendor implementations. The goal here is to provide a balance between features that are implemented in a driver and these that are better implemented in a client library.

2.4. Embracing Vendor-specific Features

Each database comes with its own feature set and how these are implemented. R2DBC’s goal is to define a minimal standard over commonly used functionality and allow for vendor-specific deviation. Drivers can implement additional functionality or make these transparent through the R2DBC SPI.

2.5. Keeping the Focus on SQL

The focus of R2DBC is on accessing relational data from the Java programming language by using databases that provide an SQL interface with which to interact.

The goal here is not to limit implementations to relational-only databases. Instead, the goal is to provide guidance for uniform reactive data access by using tabular data consumption patterns.

2.6. Keeping It Minimal and Simple

R2DBC does not aim to be a general-purpose data-access API.

R2DBC specializes in reactive data access and common usage patterns that result from relational data interaction. R2DBC does not aim to abstract common functionality that needs to be re-implemented by driver vendors in a similar manner. It aims to leave this functionality to client libraries, of which there are typically fewer implementations than drivers.

2.7. Providing a Foundation for Tools and Higher-level APIs

The R2DBC SPI aims for being primarily consumed though client library implementations.

It does not aim to be an end-user or application developer programming interface.

Having a uniform reactive relational data access SPI makes R2DBC a valuable target platform for tool vendors and application developers who want to create portable tools and applications.

2.8. Specifying Requirements Unambiguously

The requirements for R2DBC compliance should be unambiguous and easy to identify. The R2DBC specification and the API documentation (Javadoc) clarify which features are required and which are optional.

3. Compliance

This chapter identifies the required features of a D2DBC driver implementation to claim compliance. Any features not identified here are considered optional.

3.1. Definitions

To avoid ambiguity, we will use the following terms in the compliance section and across this specification:

R2DBC driver implementation

(short form: driver)A driver that implements the R2DBC SPI. A driver may provide support for features that are not implemented by the underlying database or expose functionality that is not declared by the R2DBC SPI (See Extension).

Supported feature

A feature for which the R2DBC SPI implementation supports standard syntax and semantics.

Partially supported feature

A feature for which some methods are implemented with standard syntax and semantics and some required methods are not implemented (typically covered by default interface methods).

Extension

A feature that is not covered by R2DBC or a non-standard implementation of a feature that is covered.

Fully implemented

Term to express that an interface has all its methods implemented to support the semantics defined in this specification.

Must implement

Term to express that an interface must be implemented, although some methods on the interface are considered optional. Methods that are not implemented rely on the default implementation.

3.2. Guidelines and Requirements

The following guidelines apply to R2DBC compliance:

  • An R2DBC SPI should implement SQL support as its primary interface. R2DBC does not rely upon (nor does it presume) a specific SQL version. SQL and aspects of statements can be entirely handled in the data source or as part of the driver.

  • The specification consists of this specification document and the specifications documented in each interface’s Javadoc.

  • Drivers supporting parametrized statements must support bind parameter markers.

  • Drivers supporting parametrized statements must support at least one parameter binding method (indexed or named).

  • Drivers must support transactions.

  • Index references to columns and parameters are zero-based. That is, the first index begins with 0.

3.3. R2DBC SPI Compliance

A driver that is compliant with the R2DBC specification must do the following:

  • Adhere to the guidelines and requirements listed under Guidelines and Requirements.

  • Support ConnectionFactory discovery through Java Service Loader of ConnectionFactoryProvider.

  • Implement a non-blocking I/O layer.

  • Fully implement the following interfaces:

    • io.r2dbc.spi.ConnectionFactory

    • io.r2dbc.spi.ConnectionFactoryMetadata

    • io.r2dbc.spi.ConnectionFactoryProvider

    • io.r2dbc.spi.Result

    • io.r2dbc.spi.Row

    • io.r2dbc.spi.RowMetadata

    • io.r2dbc.spi.Batch

  • Implement the io.r2dbc.spi.Connection interface, except for the following optional methods:

    • createSavepoint(…): Calling this method should throw an UnsupportedOperations exception for drivers that do not support savepoints.

    • releaseSavepoint(…): Calling this method should be a no-op for drivers that do not support savepoint release.

    • rollbackTransactionToSavepoint(…): Calling this method should throw an UnsupportedOperations exception for drivers that do not support savepoints.

  • Implement the io.r2dbc.spi.Statement interface, except for the following optional methods:

    • returnGeneratedValues(…): Calling this method should be a no-op for drivers that do not support key generation.

    • fetchSize(…): Calling this method should be a no-op for drivers that do not support fetch size hints.

  • Implement the io.r2dbc.spi.ColumnMetadata interface, except for the following optional methods:

    • getPrecision()

    • getScale()

    • getNullability()

    • getJavaType()

    • getNativeTypeMetadata()

A driver can implement optional Extensions if it is able to provide extension functionality specified by R2DBC.

4. Overview

R2DBC provides an API for Java programs to access one or more sources of data. In the majority of cases, the data source is a relational DBMS and its data is accessed using SQL. R2DBC drivers are not limited to RDBMS but can be implemented on top of other data sources, including stream-oriented systems and object-oriented systems. A primary motivation for R2DBC SPI is to provide a standard API for reactive applications to integrate with a wide variety of data sources.

This chapter gives an overview of the API and the key concepts of the R2DBC SPI. It includes the following topics:

4.1. Establishing a Connection

R2DBC uses the Connection interface to define a logical connection API to the underlying data source. The structure of a connection depends on the actual requirements of a data source and how the driver implements these.

In a typical scenario, an application that uses R2DBC connects to a target data source byusing one of two mechanisms:

  • ConnectionFactories: R2DBC SPI provides this fully implemented class. It provides ConnectionFactory discovery functionality for applications that want to obtain a connection without using a vendor-specific API. When an application first attempts to connect to a data source, ConnectionFactories automatically loads any R2DBC driver found on the classpath by using Java’s ServiceLoader mechanism. See ConnectionFactory Discovery for the details of how to implement the discovery mechanism for a particular driver.

  • ConnectionFactory: A ConnectionFactory is implemented by a driver and provides access to Connection creation. An application that wants to configure vendor-specific aspects of a driver can use the vendor-specific ConnectionFactory creation mechanism to configure a ConnectionFactory.

4.1.1. Using ConnectionFactory Discovery

As mentioned earlier, R2DBC supports the concept of discovery to find an appropriate driver for a connection request. Providing a ConnectionFactory to an application is typically a configuration infrastructure task. Applications that wish to bootstrap an R2DBC client typically handle this aspect directly in application code and, so, discovery can become a task for application developers.

ConnectionFactories provides two standard mechanisms to bootstrap a ConnectionFactory:

  • URL-based: R2DBC supports a uniform URL-based configuration scheme with a well-defined structure and well-known configuration properties. URLs are represented as Java String and can be passed to ConnectionFactories for ConnectionFactory lookup.

  • Programmatic: In addition to a URL-based configuration, R2DBC provides a programmatic approach so that applications can supply structured configuration options to obtain a ConnectionFactory.

In addition to the two preceding methods, R2DBC embraces a mixed mechanism as typical configuration infrastructure mixes URL- and programmatic-based configuration of data sources for enhanced flexibility. A typical use case is the separation of concerns in which data-source coordinates are supplied by using a URL while login credentials originate from a different configuration source.

4.1.2. R2DBC Connection URL

R2DBC defines a standard URL format that is an enhanced form of RFC 3986 Uniform Resource Identifier (URI): Generic Syntax and its amendments supported by Java’s java.net.URI type.

The following listing shows the syntax Components from RFC3986:

 
      URI         = scheme ":" driver [ ":" protocol ] ":" hier-part [ "?" query ] [ "#" fragment ]

      scheme      = "r2dbc" / "r2dbcs"

      driver      = ALPHA *( ALPHA )

      protocol    = ALPHA *( ALPHA / DIGIT / "+" / "-" / "." / ":")

      hier-part   = "//" authority path-abempty
                  / path-absolute
                  / path-rootless
                  / path-empty

      authority   = [ userinfo "@" ] host [ ":" port ] [ "," host [ ":" port ] ]

      userinfo    = *( unreserved / pct-encoded / sub-delims / ":" )

      host        = IP-literal / IPv4address / reg-name

      port        = *DIGIT

      query       = *( pchar / "/" / "?" )

      fragment    = *( pchar / "/" / "?" )

      pct-encoded = "%" HEXDIG HEXDIG

      pchar       = unreserved / pct-encoded / sub-delims / ":" / "@"

      sub-delims  = "!" / "$" / "&" / "'" / "(" / ")"
                 / "*" / "+" / "," / ";" / "="

      unreserved  = ALPHA / DIGIT / "-" / "." / "_" / "~"
Example 1. R2DBC Connection URL
 
r2dbc:a-driver:pipes://localhost:3306/my_database?locale=en_US
\___/ \______/ \___/   \____________/\__________/\___________/
  |       |      |           |           |           |
scheme  driver  protocol  authority    path        query
  • scheme: Identify that the URL is a valid R2DBC URL. Valid schemes are r2dbc and r2dbcs (configure SSL usage).

  • driver: Identifier for a driver. R2DBC has no authority over driver identifiers.

  • protocol: Used as optional protocol information to configure a driver-specific protocol. Protocols can be organized hierarchically and are separated by a colon (:).

  • authority: Contains an endpoint and authorization. The authority may contain a single host or a collection of hostnames and port tuples by separating these with a comma (,).

  • path: (optional) Used as an initial schema or database name.

  • query: (optional) Used to pass additional configuration options in the form of String key-value pairs by using the key name as the option name.

  • fragment: Unused (reserved for future use).

ConnectionFactoryOptions.parse(String) parses a R2DBC URL into ConnectionFactoryOptions using standard and optional extended options. A R2DBC Connection URL is parsed into the following options (by using ConnectionFactoryOptions constants):

The following listing shows an example URL:

Example 2. R2DBC Connection URL
r2dbc:a-driver:pipes://hello:world@localhost:3306/my_database?locale=en_US

The following table describes the standard options:

Table 1. Parsed Standard Options
Option URL Part Value as per Example

ConnectionFactoryOptions.SSL

r2dbc

Unconfigured.

ConnectionFactoryOptions.DRIVER

driver

a-driver

ConnectionFactoryOptions.PROTOCOL

protocol

pipes

ConnectionFactoryOptions.USER

User-part of authority

hello

ConnectionFactoryOptions.PASSWORD

Password-part of authority

world

ConnectionFactoryOptions.HOST

Host-part of authority

localhost

ConnectionFactoryOptions.PORT

Port-part of authority

3306

ConnectionFactoryOptions.DATABASE

path without the leading /

my_database

The following table describes the extended options:

Table 2. Parsed Extended Options
Option URL Part Value as per Example

locale

key-value tuple from query

en_US

R2DBC defines well-known standard options that are available as runtime constants through ConnectionFactories. Additional options identifiers are created through Option.valueOf(…).
Example 3. Obtaining a ConnectionFactory using R2DBC URL
ConnectionFactory factory = ConnectionFactories.get("r2dbc:a-driver:pipes://localhost:3306/my_database?locale=en_US");
Example 4. Obtaining a ConnectionFactory using ConnectionFactoryOptions
ConnectionFactoryOptions options = ConnectionFactoryOptions.builder()
    .option(ConnectionFactoryOptions.DRIVER, "a-driver")
    .option(ConnectionFactoryOptions.PROTOCOL, "pipes")
    .option(ConnectionFactoryOptions.HOST, "localhost")
    .option(ConnectionFactoryOptions.PORT, 3306)
    .option(ConnectionFactoryOptions.DATABASE, "my_database")
    .option(Option.valueOf("locale"), "en_US")
    .build();

ConnectionFactory factory = ConnectionFactories.get(options);

4.2. Running SQL and Retrieving Results

Once a connection has been established, an application using the R2DBC SPI can execute queries and updates against the connected database. The R2DBC SPI provides a text-based command interface to the most commonly used features of SQL databases. R2DBC driver implementations may expose additional functionality in a non-standard way.

Applications use methods in the Connection interface to specify transaction attributes and create Statement or Batch objects. These statements are used to execute SQL and retrieve results and allow for binding values to parameter bind markers. The Result interface encapsulates the results of an SQL query. Statements may also be batched, allowing an application to submit multiple commands to a database as a single unit of execution.

5. Connections

R2DBC uses the Connection interface to define a logical connection API to the underlying data source. The structure of a connection depends on the actual requirements of the data source and how the driver implements these.

The data source can be an RDBMS, a stream-oriented data system, or some other source of data with a corresponding R2DBC driver. A single application that uses R2DBC SPI can maintain multiple connections to either a single data source or across multiple data sources. From a R2DBC driver perspective, a Connection object represents a single client session. It has associated state information, such as user ID and what transaction semantics are in effect. A Connection object is not thread-safe (it cannot be shared across multiple threads that concurrently execute statements or change its state). A connection object can be shared across multiple threads that serially run operations by using appropriate synchronization mechanisms.

To obtain a connection, the application can:

  • Interact with the ConnectionFactories class by working with one or more ConnectionFactoryProvider implementations.

  • Directly interact with a ConnectionFactory implementation.

See Establishing a Connection for more details.

5.1. The ConnectionFactory Interface

R2DBC drivers must implement the ConnectionFactory interface as a mandatory part of the SPI. Drivers can provide multiple ConnectionFactory implementations, depending on the protocol in use or aspects that require the use of a different ConnectionFactory implementation. The following listing shows the ConnectionFactory interface:

Example 5. ConnectionFactory Interface
public interface ConnectionFactory {

    Publisher<? extends Connection> create();

    ConnectionFactoryMetadata getMetadata();

}

The following rules apply:

  • A ConnectionFactory represents a resource factory for deferred connection creation. It may create connections by itself, wrap a ConnectionFactory, or apply connection pooling on top of a ConnectionFactory.

  • A ConnectionFactory provides metadata about the driver itself through ConnectionFactoryMetadata.

  • A ConnectionFactory uses deferred initialization and should initiate connection resource allocation after requesting the item (Subscription.request(1)).

  • Connection creation must emit exactly one Connection or an error signal.

  • Connection creation must be cancellable (Subscription.cancel()). Canceling connection creation must release (“close”) the connection and all associated resources.

  • A ConnectionFactory should expect that it can be wrapped. Wrappers must implement the Wrapped<ConnectionFactory> interface and return the underlying ConnectionFactory when Wrapped.unwrap() gets called.

5.1.1. ConnectionFactory Metadata

ConnectionFactory instances are required to expose metadata to identify the driver (ConnectionFactory) and its capabilities. Metadata must not require a connection to a data source. The following listing shows the ConnectionFactoryMetadata interface:

Example 6. ConnectionFactoryMetadata Interface
public interface ConnectionFactoryMetadata {

    String getName();

}

See the R2DBC SPI Specification for more details.

5.2. ConnectionFactory Discovery Mechanism

As part of its usage, the ConnectionFactories class tries to load any R2DBC driver classes referenced by the ConnectionFactoryProvider interface listed in the Java Service Provider manifests that are available on the classpath.

Drivers must include a file called META-INF/services/io.r2dbc.spi.ConnectionFactoryProvider. This file contains the name of the R2DBC driver’s implementation (or implementations) of io.r2dbc.spi.ConnectionFactoryProvider. To ensure that drivers can be loaded by using this mechanism, io.r2dbc.spi.ConnectionFactoryProvider implementations are required to provide a no-argument constructor. The following listing shows a typical META-INF/services/io.r2dbc.spi.ConnectionFactoryProvider file:

Example 7. META-INF/services/io.r2dbc.spi.ConnectionFactoryProvider file contents
com.example.ConnectionFactoryProvider

The following listing shows the ConnectionFactoryProvider interface:

Example 8. ConnectionFactoryProvider Interface
public interface ConnectionFactoryProvider {

    ConnectionFactory create(ConnectionFactoryOptions connectionFactoryOptions);

    boolean supports(ConnectionFactoryOptions connectionFactoryOptions);

    String getDriver();

}

ConnectionFactories uses a ConnectionFactoryOptions object to look up a matching driver by using a two-step model:

  1. Look up an adequate ConnectionFactoryProvider.

  2. Obtain the ConnectionFactory from the ConnectionFactoryProvider.

ConnectionFactoryProvider implementations are required to return a boolean indicator whether or not they support a specific configuration represented by ConnectionFactoryOptions. Drivers must expect any plurality of Option instances to be configured. Drivers must report that they support a configuration only if the ConnectionFactoryProvider can provide a ConnectionFactory based on the given ConnectionFactoryOptions. A typical task handled by supports is checking driver and protocol options. Drivers should gracefully fail if a ConnectionFactory creation through ConnectionFactoryProvider.create(…) is not possible (i.e. when required options were left unconfigured). The getDriver() method reports the driver identifier that is associated with the ConnectionFactoryProvider implementation to provide diagnostic information to users in misconfiguration cases.

See the R2DBC SPI Specification and ConnectionFactory Discovery for more details.

5.3. The ConnectionFactoryOptions Class

The ConnectionFactoryOptions class represents a configuration for a request a ConnectionFactory from a ConnectionFactoryProvider. It enables the programmatic connection creation approach without using driver-specific classes. ConnectionFactoryOptions instances are created by using the builder pattern, and properties are configured through Option<T> identifiers. A ConnectionFactoryOptions is immutable once created. Option objects are reused as part of the built-in constant pool. Options are identified by a literal.

ConnectionFactoryOptions defines a set of well-known options:

Table 3. Well-known Options
Constant Literal Type Description

SSL

ssl

java.lang.Boolean

Whether the connection is configured to require SSL.

DRIVER

driver

java.lang.String

Driver identifier.

PROTOCOL

protocol

java.lang.String

Protocol details, such as the network protocol used to communicate with a server.

USER

user

java.lang.String

User account name.

PASSWORD

password

java.lang.CharSequence

User or database password.

HOST

host

java.lang.String

Database server name.

PORT

port

java.lang.Integer

Database server port number.

DATABASE

database

java.lang.String

Name of the particular database on a server.

CONNECT_TIMEOUT

connectTimeout

java.time.Duration

Connection timeout to obtain a connection.

The following rules apply:

  • The set of options is extensible.

  • Drivers can declare which well-known options they require and which they support.

  • Drivers can declare which extended options they require and which they support.

  • Drivers should not fail in creating a connection if more options are declared than the driver consumes, as a ConnectionFactory should expect to be wrapped.

The following example shows how to set options for a ConnectionFactoryOptions:

Example 9. Configuration of ConnectionFactoryOptions
ConnectionFactoryOptions options = ConnectionFactoryOptions.builder()
    .option(ConnectionFactoryOptions.HOST, "…")
    .option(Option.valueOf("tenant"), "…")
    .option(Option.sensitiveValueOf("encryptionKey"), "…")
    .build();

See the R2DBC SPI Specification for more details.

5.4. Obtaining Connection Objects

Once a ConnectionFactory is bootstrapped, connections are obtained from the create() method. The following example shows how to obtain a connection:

Example 10. Obtaining a Connection
// factory is a ConnectionFactory object
Publisher<? extends Connection> publisher = factory.create();

The connection is active once it has been emitted by the Publisher and must be released (“closed”) once it is no longer in use.

5.5. Connection Metadata

Connections are required to expose metadata about the database they are connected to. Connection Metadata is typically discovered dynamically based from information obtained during Connection initialization.

Example 11. ConnectionMetadata Interface
public interface ConnectionMetadata {

    String getDatabaseProductName();

    String getDatabaseVersion();

}

See the R2DBC SPI Specification for more details.

5.6. Validating Connection Objects

The Connection.validate(…) method indicates whether the Connection is still valid. The ValidationDepth argument passed to this method indicates the depth to which a connection should be validated: LOCAL or REMOTE.

  • ValidationDepth.LOCAL: Requests client-side-only validation without engaging a remote conversation to validate a connection.

  • ValidationDepth.REMOTE: Initiates a remote validation by issuing a query or other means to validate a connection and the remote session.

If Connection.validate(…) emits true, the Connection is still valid. If Connection.validate(…) emits false, the Connection is not valid, and any attempt to perform database interaction fails. Callers of this method do not expect error signals.

5.7. Closing Connection Objects

Calling Connection.close() prepares a close handle to release the connection and its associated resources. Connections must be closed to ensure proper resource management. You can use Connection.validate(…) to determine whether a Connection has been closed or is still valid. The following example shows how to close a connection:

Example 12. Closing a Connection
// connection is a ConnectionFactory object
Publisher<Void> close = connection.close();

See the R2DBC SPI Specification for more details.

6. Transactions

Transactions are used to provide data integrity, isolation, correct application semantics, and a consistent view of data during concurrent database access. All R2DBC-compliant drivers are required to provide transaction support. Transaction management in the R2DBC SPI reflects SQL concepts:

  • Auto-commit mode

  • Transaction isolation levels

  • Savepoints

This section explains transaction semantics associated with a single Connection object.

6.1. Transaction Boundaries

You can implicitly or explicitly start transactions. You can implicitly start a transaction by starting SQL execution when a Connection is in auto-commit mode (which is the default for newly created connections). When auto-commit mode is disabled, you can explicitly start a transaction by invoking the beginTransaction() method. Transactions are started by either an R2DBC driver or by the underlying database.

The Connection attribute auto-commit mode specifies when to end transactions. Enabling auto-commit mode causes a transaction commit after each SQL statement as soon as that statement is completely executed.

[[transactions.auto-commit] == Auto-commit Mode

A ConnectionFactory creates new Connection objects with auto-commit mode enabled. The Connection interface provides two methods to interact with auto-commit mode:

  • setAutoCommit

  • isAutoCommit

R2DBC applications should change auto-commit mode by invoking the setAutoCommit method instead of executing SQL commands to change the connection configuration. If the value of auto-commit is changed during an active transaction, the current transaction is committed. If setAutoCommit is called and the value for auto-commit is not changed from its current value, this is treated as a no-op.

Changing auto-commit mode typically engages database activity. Therefore, the method returns a Publisher. Querying auto-commit mode is typically a local operation that involves driver state without database communication.

When auto-commit is disabled, you must explicitly start and clean up each transaction by calling the Connection methods beginTransaction and commitTransaction (or rollbackTransaction), respectively.

This is appropriate for cases where transaction management is being done in a layer above the driver, such as:

  • The application needs to group multiple SQL statements into a single transaction.

  • An application container manages the transaction state.

[[transactions.isolation] == Transaction Isolation

Transaction isolation levels define the level of visibility (“isolation”) for statements that are run within a transaction. They impact concurrent access while multiple transactions are active.

The default transaction level for a Connection object is vendor-specific and determined by the driver that supplied the connection. Typically, it defaults to the transaction level supported by the underlying data source.

The Connection interface provides two methods to interact with transaction isolation levels:

  • setTransactionIsolationLevel

  • getTransactionIsolationLevel

R2DBC applications should change transaction isolation levels by invoking the setTransactionIsolationLevel method instead of running SQL commands to change the connection configuration.

Changing transaction isolation levels typically involves database activity. Therefore, the method returns a Publisher. Changing an isolation level during an active transaction results in implementation-specific behavior. Querying transaction isolation levels is typically a local operation that involves driver state without database communication. The return value of the getTransactionIsolationLevel method should reflect the current isolation level when it actually occurs. IsolationLevel is an extensible runtime constant, so drivers can define their own isolation levels. A driver may not support transaction levels. Calling getTransactionIsolationLevel results in returning the vendor-specific IsolationLevel object.

6.1.1. Performance Considerations

When you increase the transaction isolation level, databases typically require more locking and resource overhead to ensure isolation level semantics. This, in turn, lowers the degree of concurrent access that can be supported. As a result, applications may see degraded performance when they use higher transaction isolation levels. For this reason, a transaction manager, whether it is the application itself or part of the application container, should weigh the need for data consistency against the requirements for performance when determining which transaction isolation level is appropriate.

6.2. Savepoints

Savepoints provide a fine-grained control mechanism by marking intermediate points within a transaction. Once a savepoint has been created, a transaction can be rolled back to that savepoint without affecting preceding work.

6.2.1. Working with Savepoints

The Connection interface defines methods to interact with savepoints:

  • createSavepoint

  • releaseSavepoint

  • rollbackTransactionToSavepoint

Savepoints are created during an active transaction and are valid only as long as the transaction is active. You can sue the createSavepoint method to set a savepoint within the current transaction. A transaction is started if createSavepoint is invoked and there is no active transaction (switching the connection to disabled auto-commit mode). The rollbackTransactionToSavepoint method is used to roll back work to a previous savepoint without rolling back the entire transaction. the following example shows how to roll back a transaction to a savepoint:

Example 13. Rolling back a transaction to a savepoint
// connection is a Connection object
Publisher<Void> begin = connection.beginTransaction();

Publisher<Void> insert1 = connection.createStatement("INSERT INTO books VALUES ('John Doe')").execute();

Publisher<Void> savepoint = connection.createSavepoint("savepoint");

Publisher<Void> insert2 = connection.createStatement("INSERT INTO books VALUES ('Jane Doe')").execute();

…

Publisher<Void> partialRollback = connection.rollbackTransactionToSavepoint("savepoint");

…

Publisher<Void> commit = connection.commit();

// publishers are materialized in the order: begin, insert1, savepoint, insert2, partialRollback, commit

Drivers that do not support savepoint creation and rolling back to a savepoint should throw an UnsupportedOperationException to indicate these features are not supported.

6.2.2. Releasing a Savepoint

Savepoints allocate resources on the databases, and some vendors may require releasing a savepoint to dispose resources. The Connection interface defines the releaseSavepoint method to release savepoints that are no longer needed.

Savepoints that were created during a transaction are released and are invalidated when the transaction is committed or when the entire transaction is rolled back. Rolling a transaction back to a savepoint automatically releases it. A rollback also invalidates any other savepoints that were created after the savepoint in question.

Calling releaseSavepoint for drivers that do not support savepoint release results in a no-op.

7. Statements

This section describes the Statement interface. It also describes related topics, including parameterized statement and auto-generated keys.

7.1. The Statement Interface

The Statement interface defines methods for running SQL statements. SQL statements may contain parameter bind markers for input parameters.

7.1.1. Creating Statements

Statement objects are created by Connection objects, as the following example shows:

Example 14. Creating a non-parameterized Statement
// connection is a Connection object
Statement statement = connection.createStatement("SELECT title FROM books");

Each Connection object can create multiple Statement objects that the program can concurrently run at any time. Resources that are associated with a statement are released as soon as the connection is closed.

7.1.2. Running Statement Objects

Statement objects are run by calling the execute() method. Depending on the SQL, the resulting Publisher may return one or many Result objects. A Statement is always associated with its Connection. Therefore, the connection state affects Statement execution at execution time. The following example shows how to run a statement:

Example 15. Running a Statement
// statement is a Statement object
Publisher<? extends Result> publisher = statement.execute();

7.2. Parameterized Statements

The SQL that is used to create a statement can be parameterized by using vendor-specific bind markers. The portability of SQL statements across R2DBC implementations is not a goal.

Parameterized Statement objects are created by Connection objects in the same manner as non-parameterized Statements. See the the following example:

Example 16. Creating three parameterized Statement objects by using vendor-specific parameter bind markers
// connection is a Connection object
Statement statement1 = connection.createStatement("SELECT title FROM books WHERE author = :author");

Statement statement2 = connection.createStatement("SELECT title FROM books WHERE author = @P0");

Statement statement3 = connection.createStatement("SELECT title FROM books WHERE author = $1");

Parameter bind markers are identified by the Statement object. Parameterized statements may be cached by R2DBC implementations for reuse (for example, for prepared statement execution).

7.2.1. Binding Parameters

The Statement interface defines bind(…) and bindNull(…) methods to provide parameter values for bind marker substitution. The parameter type is defined by the actual value that is bound to a parameter. Each bind method accepts two arguments. The first is either an ordinal position parameter starting at 0 (zero) or the parameter placeholder representation. The method of parameter binding (positional or by identifier) is vendor-specific, and a driver should document its preferred binding mechanism. The second and any remaining parameters specify the value to be assigned to the parameter. The following example shows how to bind parameters to a statement object by using placeholders:

Example 17. Binding parameters to a Statement object by using placeholders
// connection is a Connection object
Statement statement = connection.createStatement("SELECT title FROM books WHERE author = $1 and publisher = $2");
statement.bind("$1", "John Doe");
statement.bind("$2", "Happy Books LLC");

Alternatively, parameters can be bound by index, as the following example shows:

Example 18. Binding parameters to a Statement object by index
// connection is a Connection object
Statement statement = connection.createStatement("SELECT title FROM books WHERE author = $1 and publisher = $2");
statement.bind(0, "John Doe");
statement.bind(1, "Happy Books LLC");

A value must be provided for each bind marker in the Statement object before the statement can be run. The execute method validates a parameterized Statement and throws an IllegalStateException if a bind marker is left without a binding.

7.2.2. Batching

Parameterized Statement objects accept multiple parameter binding sets to submit a batch of commands to the database for running. A batch run is initiated by invoking the add() method on the Statement object after providing all parameters. After calling add(), the next set of parameter bindings is provided by calling bind methods accordingly. The following example shows how to run a batch Statement:

Example 19. Running a Statement batch
// connection is a Connection object
Statement statement = connection.createStatement("INSERT INTO books (author, publisher) VALUES ($1, $2)");
statement.bind(0, "John Doe").bind(1, "Happy Books LLC").add();
statement.bind(0, "Jane Doe").bind(1, "Scary Books Inc");
Publisher<? extends Result> publisher = statement.execute();

A batch run emits one or many Result objects, depending on how the implementation executes the batch.

7.2.3. Setting NULL Parameters

You can use the bindNull method to set any parameter to NULL. It takes two parameters:

  • Either the ordinal position of the bind marker or the name.

  • The value type of the parameter.

The following example shows how to set NULL value:

Example 20. Setting a NULL value.
// statement is a Statement object
statement.bindNull(0, String.class);

7.3. Retrieving Auto Generated Values

Many database systems provide a mechanism that automatically generates a value when a row is inserted. The value that is generated may or may not be unique or represent a key value, depending on the SQL and the table definition. You can call the returnGeneratedValues method to retrieve the generated value. It tells the Statement object to retrieve generated values. The method accepts a variable-argument parameter to specify the column names for which to return generated keys. The emitted Result exposes a column for each automatically generated value (taking the column name hint into account). The following example shows how to retrieve auto-generated values:

Example 21. Retrieving auto-generated values
// connection is a Connection object
Statement statement = connection.createStatement("INSERT INTO books (author, publisher) VALUES ('John Doe', 'Happy Books LLC')").returnGeneratedValues("id");
Publisher<? extends Result> publisher = statement.execute();

// later
result.map((row, metadata) -> row.get("id"));

When column names are not specified, the R2DBC driver implementation determines the columns or value to return.

See the R2DBC SPI Specification for more details.

7.4. Performance Hints

The Statement interface provides a method that you can use to provide hints to a R2DBC driver. Calling fetchSize applies a fetch-size hint to each query produced by the statement. Hints provided to the driver through this interface may be ignored by the driver if they are not appropriate or supported. Typically, fetch size can be derived from back-pressure hints. To optimize for performance, it can be useful to provide hints to the driver on a per-statement basis.

8. Batches

This section describes the Batch interface.

8.1. The Batch Interface

The Batch interface defines methods for running groups of SQL statements. SQL statements may not contain parameter bind markers for input parameters. A batch is created to run multiple SQL statements for performance reasons.

8.1.1. Creating Batches

Batch objects are created by Connection objects, as the following example shows:

Example 22. Creating a Batch
// connection is a Connection object
Batch batch = connection.createBatch();

Each Connection object can create multiple Batch objects that can be used concurrently by the program and can be run at any time. Resources that are associated with a batch are released as soon as the connection is closed.

8.1.2. Executing Batch Objects

Batch objects are run by calling the execute() method after adding one or more SQL statements to a Batch. The resulting Publisher returns a Result object for each statement in the batch. A Batch is always associated with its Connection. Therefore, the connection state affects Batch execution at run time.

The following example shows how to run a batch:

Example 23. Running a Batch
// connection is a Connection object
Batch batch = connection.createBatch();
Publisher<? extends Result> publisher = batch.add("SELECT title, author FROM books")
    .add("INSERT INTO books VALUES('John Doe', 'HappyBooks LLC')")
    .execute();

See the R2DBC SPI Specification for more details.

9. Results

This section explains the Result interface and the related Row interface. It also describes related topics, including result consumption.

9.1. Result Characteristics

Result objects are forward-only and read-only objects that allow consumption of two result types:

  • Tabular results

  • Update count

Results move forward from the first Row to the last one. After emitting the last row, a Result object gets invalidated and rows from the same Result object can no longer be consumed. Rows contained in the result depend on how the underlying database materializes the results. That is, it contains the rows that satisfy the query at either the time the query is run or as the rows are retrieved. An R2DBC driver can obtain a Result either directly or by using cursors.

Result reports the number of rows affected for SQL statements, such as updates for SQL Data Manipulation Language (DML) statements. The update count can be empty for statements that do not modify rows. After emitting the update count, a Result object gets invalidated and rows from the same Result object can no longer be consumed. The following example shows how to get a count of updated rows:

Example 24. Consuming an update count
// result is a Result object
Publisher<Integer> rowsUpdated = result.getRowsUpdated();

The streaming nature of a result allows consumption of either tabular results or an update count. Depending on how the underlying database materializes results, an R2DBC driver can lift this limitation.

A Result object is emitted for each statement result in a forward-only direction.

9.2. Creating Result Objects

A Result object is most often created as the result of running a Statement object. The Statement.execute() method returns a Publisher that emits a Result objects as the result of running the statement. The following example shows how to create a Result object:

Example 25. Creating a Result object
// connection is a Connection object
Statement statement = connection.createStatement("SELECT title, author FROM books");
Publisher<? extends Result> results = statement.execute();

The Result object emits a Row object for each row in the books table (which contains two columns: title and author). The following sections detail how these rows and columns can be consumed.

9.2.1. Cursor Movement

Result objects can be backed by direct results (that is, a query that returns results directly) or by cursors. By consuming Row objects, an R2DBC driver advances the cursor position. Thus, external cursor navigation is not possible.

Canceling subscription of tabular results stops cursor reads and releases any resources associated with the Result object.

9.3. Rows

A Row object represents a single row of tabular results.

9.3.1. Retrieving Values

The Result interface provides a map(…) method for retrieving values from Row objects. The map method accepts a BiFunction (also referred to as mapping function) object that accepts Row and RowMetadata. The mapping function is called upon row emission with Row and RowMetadata objects. A Row is only valid during the mapping function callback and is invalid outside of the mapping function callback. Thus, Row objects must be entirely consumed by the mapping function.

The Column and Row Metadata section contains additional details on metadata.

9.4. Interface Methods

The following methods are available on the Row interface:

  • Object get(int)

  • Object get(String)

  • <T> T get(int, Class<T>)

  • <T> T get(String, Class<T>)

get(int[, Class]) methods accept column indexes starting at 0, get(String[, Class]) methods accept column name aliases as they are represented in the result. Column names used as input to the get methods are case insensitive. Column names do not necessarily reflect the column names as they are in the underlying tables but, rather, how columns are represented (for example, aliased) in the result. The following example shows how to create and consume a Row by using its index:

Example 26. Creating and Consuming a Row using its index
// result is a Result object
Publisher<Object> values = result.map((row, rowMetadata) -> row.get(0));

The following example shows how to create and consume a Row by using its column name:

Example 27. Creating and Consuming a Row by using its column name
// result is a Result object
Publisher<Object> titles = result.map((row, rowMetadata) -> row.get("title"));

Calling get without specifying a target type returns a suitable value representation according to Mapping of Data Types. When you specify a target type, the R2DBC driver tries to convert the value to the target type. The following example shows how to creat and consume a Row with type conversion:

Example 28. Creating and Consuming a Row with type conversion
// result is a Result object
Publisher<String> values = result.map((row, rowMetadata) -> row.get(0, String.class));

You can also consume multiple columns from a Row, as the following example shows:

Example 29. Consuming multiple columns from a Row
// result is a Result object
Publisher<Book> values = result.map((row, rowMetadata) -> {
    String title = row.get("title", String.class);
    String author = row.get("author", String.class);

    return new Book(title, author);
});

When the column value in the database is SQL NULL, it can be returned to the Java application as null.

null values cannot be returned as Reactive Streams values and must be wrapped for subsequent usage.
Invalidating a Row does not release Blob and Clob objects that were obtained from the Row. These objects remain valid for at least the duration of the transaction in which they were created, unless their discard() method is called.

10. Column and Row Metadata

The RowMetadata interface is implemented by R2DBC drivers to provide information about tabular results. It is used primarily by libraries and applications to determine the properties of a row and its columns.

In cases where the result properties of an SQL statement are unknown until it is run, the RowMetadata can be used to determine the actual properties of a row.

RowMetadata exposes ColumnMetadata for each column in the result. Drivers should provide ColumnMetadata on a best-effort basis. Column metadata is typically a by-product of statement execution. The amount of available information is vendor-dependent. Metadata retrieval can require additional lookups (internal queries) to provide a complete metadata descriptor. Issuing queries during result processing conflicts with the streaming nature of R2DBC. Consequently, ColumnMetadata declares two sets of methods: methods that must be implemented and methods that can optionally be implemented by drivers.

10.1. Obtaining a RowMetadata Object

A RowMetadata object is created during tabular results consumption through Result.map(…). It is created for each row. The following example illustrates retrieval and usage by using an anonymous inner class:

Example 30. Using RowMetadata and retrieving ColumnMetadata
// result is a Result object
result.map(new BiFunction<Row, RowMetadata, Object>() {

    @Override
    public Object apply(Row row, RowMetadata rowMetadata) {
        ColumnMetadata my_column = rowMetadata.getColumnMetadata("my_column");
        ColumnMetadata.Nullability nullability = my_column.getNullability();
        // …
    }
})

10.2. Retrieving ColumnMetadata

RowMetadata methods are used to retrieve metadata for a single column or all columns.

  • getColumnMetadata(int) returns the ColumnMetadata by using a zero-based index. See Guidelines and Requirements.

  • getColumnMetadata(String) returns the ColumnMetadata by using the column name.

  • getColumnMetadatas() returns an unmodifiable collection of ColumnMetadata objects.

10.3. Retrieving General Information for a Column

ColumnMetadata declares methods to access column metadata on a best-effort basis. Column metadata that is available as a by-product of running a statement must be made available through ColumnMetadata. Metadata exposure requiring interaction with the database (for example, issuing queries to information schema entities to resolve type properties) should not be exposed, because methods on ColumnMetadata are expected to be non-blocking.

Implementation note: Drivers can use metadata from a static mapping or obtain metadata indexes on connection creation.

The following example shows how to consume ColumnMetadata by using lambdas:

Example 31. Retrieving ColumnMetadata information
// row is a RowMetadata object
row.getColumnMetadatas().forEach(columnMetadata -> {

    String name = columnMetadata.getName();
    Integer precision = columnMetadata.getPrecision();
    Integer scale = columnMetadata.getScale();
});

See the API specification for more details.

11. Exceptions

This section explains how R2DBC uses and declares exceptions to provide information about various types of failures.

An exception is thrown by a driver when an error occurs during interaction with the driver or a data source. R2DBC differentiates between generic and data-source-specific error cases.

11.1. General Exceptions

R2DBC defines the following general exceptions:

11.1.1. IllegalArgumentException

Drivers throw IllegalArgumentException if a method has been received an illegal or inappropriate argument (such as values that are out of bounds or an expected parameter is null). This exception is a generic exception that is not associated with an error code or an SQLState.

11.1.2. IllegalStateException

Drivers throw IllegalStateException if a method has received an argument that is invalid in the current state or when an argument-less method is invoked in a state that does not allow execution in the current state (such as interacting with a closed connection object). This exception is a generic exception that is not associated with an error code or an SQLState.

11.1.3. UnsupportedOperationException

Drivers throw UnsupportedOperationException if the driver does not support certain functionality (such as when a method implementation cannot be provided). This exception is a generic exception that is not associated with an error code or an SQLState.

11.1.4. R2dbcException

Drivers throw an instance of R2dbcException when an error occurs during an interaction with a data source.

The exception contains the following information:

  • A textual description of the error. You can retrieve the String that contains the description by invoking R2dbcException.getMessage(). Drivers may provide a localized message variant.

  • An SQLState. The String that contains the SQLState can be retrieved by calling the R2dbcException.getSqlState() method. The value of the SQLState string depends on the underlying data source.

  • An error code. The code is an integer value that identifies the error that caused the R2dbcException to be thrown. Its value and meaning are implementation-specific and may be the actual error code returned by the underlying data source. You can retrieve the error code by using the R2dbcException.getErrorCode() method.

  • A cause. This is another Throwable that caused this R2dbcException to occur.

11.2. Categorized Exceptions

Categorized exceptions provide a standard mapping to common error states. An R2DBC driver should provide specific subclasses to indicate affinity with the driver. Categorized exceptions provide a standardized approach for R2DBC clients and R2DBC users to translate common exceptions into an application-specific state without the need to implement SQLState-based exception translation, resulting in more portable error-handling code.

R2DBC categorizes exceptions into two top-level categories:

11.2.1. Non-Transient Exceptions

A non-transient exception must extend the abstract class, R2dbcNonTransientException. A non-transient exception is thrown when a retry of the same operation would fail unless the cause of the error is corrected. After a non-transient exception other than R2dbcNonTransientResourceException, the application can assume that a connection is still valid.

R2DBC defines the following subclasses of non-transient exceptions:

  • R2dbcBadGrammarException: Thrown when the SQL statement has a problem in its syntax.

  • R2dbcDataIntegrityViolationException: Thrown when an attempt to insert or update data results in a violation of an integrity constraint.

  • R2dbcPermissionDeniedException: Thrown when the underlying resource denied a permission to access a specific element, such as a specific database table.

  • R2dbcNonTransientException: Thrown when a resource fails completely and the failure is permanent. A connection may not be considered valid if this exception is thrown.

11.2.2. Transient Exceptions

A transient exception must extend the abstract class, R2dbcTransientException. A transient exception is thrown when a previously failed operation might be able to succeed if the operation is retried without any intervention in application-level functionality. After a non-transient exception other than R2dbcTransientResourceException, the application may assume that a connection is still valid.

  • R2dbcRollbackException: Thrown when an attempt to commit a transaction resulted in an unexpected rollback due to deadlock or transaction serialization failures.

  • R2dbcTimeoutException: Thrown when the timeout specified by a database operation (query, login, and so on) is exceeded. This could have different causes (depending on the database API in use) but is most likely thrown after the database interrupts or stops the processing of a query before it has completed.

  • R2dbcNonTransientException: Thrown when a resource fails temporarily and the operation can be retried. A connection may not be considered valid if this exception is thrown.

12. Data Types

This chapter discusses the use of data types from Java and database perspectives. The R2DBC SPI gives applications access to data types that are defined as SQL. R2DBC is not limited to SQL types, and, in fact, the SPI is type-agnostic.

If a data source does not support a data type described in this chapter, a driver for that data source is not required to implement the methods and interfaces associated with that data type.

12.1. Mapping of Data Types

This section explains how SQL-specific types are mapped to Java types. The list is not exhaustive and should be received as a guideline for drivers. R2DBC drivers should use modern types and type descriptors to exchange data for consumption by applications and consumption by the driver. Driver implementations should implement the following type mapping and can support additional type mappings:

The following table describes the SQL type mapping for character types:

Table 4. SQL Type Mapping for Character Types
SQL Type Description Java Type

CHARACTER (CHAR)

Character string, fixed length.

java.lang.String

CHARACTER VARYING (VARCHAR)

Variable-length character string, maximum length fixed.

java.lang.String

NATIONAL CHARACTER (NCHAR)

The NATIONAL CHARACTER type is the same as CHARACTER except that it holds standardized multibyte characters or Unicode characters.

java.lang.String

NATIONAL CHARACTER VARYING (NVARCHAR)

The NATIONAL CHARACTER VARYING type is the same as CHARACTER VARYING except that it holds standardized multibyte characters or Unicode characters.

java.lang.String

CHARACTER LARGE OBJECT (CLOB)

A Character Large OBject (or CLOB) is a collection of character data in a DBMS, usually stored in a separate location that is referenced in the table itself.

io.r2dbc.spi.Clob

NATIONAL CHARACTER LARGE OBJECT (NCLOB)

The NATIONAL CHARACTER LARGE OBJECT type is the same as CHARACTER LARGE OBJECT except that it holds standardized multibyte characters or Unicode characters.

io.r2dbc.spi.Clob

The following table describes the SQL type mapping for boolean types:

Table 5. SQL Type Mapping for Boolean Types
SQL Type Description Java Type

BOOLEAN

A value that represents a boolean state.

java.lang.Boolean

The following table describes the SQL type mapping for binary types:

Table 6. SQL Type Mapping for Binary Types
SQL Type Description Java Type

BINARY

Binary data, fixed length.

java.nio.ByteBuffer

BINARY VARYING (VARBINARY)

A variable-length character string, the maximum length of which is fixed.

java.nio.ByteBuffer

BINARY LARGE OBJECT (BLOB)

A Binary Large OBject (or BLOB) is a collection of binary data in a database management system, usually stored in a separate location that is referenced in the table itself.

io.r2dbc.spi.Blob

The following table describes the SQL type mapping for numeric types:

Table 7. SQL Type Mapping for Numeric Types
SQL Type Description Java Type

INTEGER

Represents an integer. The minimum and maximum values depend on the DBMS (typically 4-byte precision).

java.lang.Integer

TINYINT

Same as the INTEGER type except that it might hold a smaller range of values, depending on the DBMS (typically 1-byte precision).

java.lang.Byte

SMALLINT

Same as the INTEGER type except that it might hold a smaller range of values, depending on the DBMS (typically 1- or 2-byte precision).

java.lang.Short

BIGINT

Same as the INTEGER type except that it might hold a larger range of values, depending on the DBMS (typically 8-byte precision).

java.lang.Long

DECIMAL(p, s), NUMERIC(p, s)

Fixed precision and scale numbers with precision (p) and scale (s). In other words, a number that can have a decimal point in it.

java.math.BigDecimal

FLOAT(p)

Represents an approximate numerical with mantissa precision (p). Databases that use IEEE representation can map values to either 32-bit or 64-bit floating point types depending on the precision parameter (p).

java.lang.Double or java.lang.Float

REAL

Same as the FLOAT type except that the DBMS defines the precision.

java.lang.Float

DOUBLE PRECISION

Same as the FLOAT type except that the DBMS defines the precision. It has greater precision than REAL.

java.lang.Double

The following table describes the SQL type mapping for datetime types:

Table 8. SQL Type Mapping for Datetime Types
SQL Type Description Java Type

DATE

Represents a date without specifying a time part and without a timezone.

java.time.LocalDate

TIME

Represents a time without a date part and without a timezone.

java.time.LocalTime

TIME WITH TIME ZONE

Represents a time with a timezone offset.

java.time.OffsetTime

TIMESTAMP

Represents a date and time without a timezone.

java.time.LocalDateTime

TIMESTAMP WITH TIME ZONE

Represents a date and time with a timezone offset.

java.time.OffsetDateTime

The following table describes the SQL type mapping for collection types:

Table 9. SQL Type Mapping for Collection Types
SQL Type Description Java Type

COLLECTION ( ARRAY, MULTISET )

Represents a collection of items with a base type.

Array-Variant of the corresponding Java type (for example, Integer[] for INTEGER ARRAY)

Vendor-specific types (such as spatial data types, structured JSON or XML data, and user-defined types) are subject to vendor-specific mapping.

12.2. Mapping of Advanced Data Types

The R2DBC SPI declares default mappings for advanced data types. The following list describes data types and the interfaces to which they map:

  • BLOB: The Blob interface

  • CLOB: The Clob interface

12.2.1. Blob and Clob Objects

An implementation of a Blob or Clob object may either be locator-based or fully materialize the object in the driver. Drivers should prefer locator-based Blob and Clob interface implementations to reduce pressure on the client when materializing results.

For implementations that fully materialize Large OBjects (LOBs), the Blob and Clob objects remain valid until the LOB is consumed or the discard() method is called.

Portable applications should not depend upon the LOB validity past the end of a transaction.

12.2.2. Creating Blob and Clob Objects

Large objects are backed by a Publisher that emits the component type of the large object, such as ByteBuffer for BLOB and CharSequence (or a subtype of it) for CLOB.

Both interfaces provide factory methods to create implementations to be used with Statement. The following example shows how to create a Clob object:

Example 32. Creating and using a Clob object
// charstream is a Publisher<String> object
  // statement is a Statement object
Clob clob = Clob.from(charstream)
statement.bind("text", clob);

12.2.3. Retrieving Blob and Clob Objects from a Row

The Binary Large OBject (BLOB) and Character Large OBject (CLOB) data types are treated similarly to primitive built-in types. You can retrieve values of these types by calling the get(…) methods on the Row interface. The following example shows how to do so:

Example 33. Retrieving a Clob object
// result is a Row object
Publisher<Clob> clob = result.map((row, rowMetadata) -> row.get("clob", Clob.class));

The Clob interface contains methods for returning the content and for releasing resources associated with the Clob object instance. The API documentation provides more details.

12.2.4. Accessing Blob and Clob Data

The Blob and Clob interfaces declare methods to consume the content of each type. Content streams follow Reactive Streams specifications and reflect the stream nature of large objects. As a result, Blob and Clob objects can be consumed only once. Large object data consumption can be canceled by calling the discard() method if the content stream was not consumed at all. Alternatively, if the content stream was consumed, a Subscription cancellation releases resources that are associated with the large object.

The following example shows how to consume Clob contents:

Example 34. Creating and using a Clob object
// clob is a Clob object
Publisher<CharSequence> charstream = clob.stream();

12.2.5. Releasing Blob and Clob

Blob and Clob objects remain valid for at least the duration of the transaction in which they are created. This could potentially result in an application running out of resources during a long-running transaction. Applications may release Blob and Clob by either consuming the content stream or disposing of resources by calling the discard() method.

The following example shows how to free Clob resources without consuming it:

Example 35. Freeing Clob object resources
// clob is a Clob object
Publisher<Void> charstream = clob.discard();
charstream.subscribe(…);

13. Extensions

This section covers optional extensions to the R2DBC Core. Extensions provide features that are not mandatory for R2DBC implementations.

13.1. Wrapped Interface

The Wrapped interface provides a way to access an instance of a resource which has been wrapped and for implementors to expose wrapped resources. This mechanism helps to eliminate the need to use non-standard means to access vendor-specific resources.

13.1.1. Usage

A wrapper for a R2DBC SPI type is expected to implement the Wrapped interface so that callers can extract the original instance. Any R2DBC SPI interface type can be wrapped. The following example shows how to expose a wrapped resource:

Example 36. Wrapping a Connection and exposing the underlying resource.
class ConnectionWrapper implements Connection, Wrapped<Connection> {

    private final Connection wrapped;

    @Override
    public Connection unwrap() {
        return this.wrapped;
    }

    // constructors and implementation methods omitted for brevity.
}

13.1.2. Interface Methods

The following methods are available on the Wrapped interface:

  • unwrap

13.1.3. The unwrap Method

The unwrap method is used to return an object that implements the specified interface, allowing access to vendor-specific methods. The returned object may either be the object found to implement the specified interface or a wrapper for that object. Wrappers can be unwrapped recursively. The following example shows how to unwrap a wrapped object:

Example 37. Unwrapping a wrapped object.
// connection is a Connection object implementing Wrapped

if (connection instanceof Wrapped) {
    connection = ((Wrapped<Connection>) connection).unwrap();
}

13.2. Closeable Interface

The io.r2dbc.spi.Closeable interface provides a mechanism for objects associated with resources to release these resources once the object is no longer in use. The associated resources are released without blocking the caller.

13.2.1. Usage

A closeable object is expected to implement the Closeable interface so that callers can obtain a Publisher to initiate the close operation and get notified upon completion. The following example shows how to close a connection:

Example 38. Closing a Connection.
// connection is a Connection object
Publisher<Void> close = connection.close();

Connection implements Closeable as a mandatory part of R2DBC. Any stateful object (such as ConnectionFactory) can implement Closeable to provide a way to release its resources.

13.2.2. Interface Methods

The following methods are available on the Closeable interface:

  • close

13.2.3. The close Method

The close method is used to return a Publisher to start the close operation and get notified upon completion. If the object is already closed, then subscriptions complete successfully and the close operation has no effect.